Adhesive-Off Pro - Low-VOC - Fast, Low-Odor Adhesive Remover for Vinyl & PPF Residue (CA Compliant)
Adhesive-Off Pro - Low-VOC - Fast, Low-Odor Adhesive Remover for Vinyl & PPF Residue (CA Compliant)
Adhesive-Off Pro - Low-VOC - Fast, Low-Odor Adhesive Remover for Vinyl & PPF Residue (CA Compliant)
Adhesive-Off Pro - Low-VOC - Fast, Low-Odor Adhesive Remover for Vinyl & PPF Residue (CA Compliant)
Adhesive-Off Pro - Low-VOC - Fast, Low-Odor Adhesive Remover for Vinyl & PPF Residue (CA Compliant)

Adhesive-Off Pro - Low-VOC - Fast, Low-Odor Adhesive Remover for Vinyl & PPF Residue (CA Compliant)

Regular price$36.99
/
Shipping calculated at checkout.
Size
Key Benefits
  • Effective on wrap glue and decal residue
  • Controlled evaporation = better dwell, better control, less waste
  • Higher flash point, lower vapor pressure, less hazardous
  • California-compliant formula for regulated markets
  • Use on paint, glass, and OEM metal surfaces

Adhesive-Off Pro Low-VOC is a professional adhesive remover for the glue left behind by vinyl wraps, reflective film, window tint, and paint protection film (PPF). We developed it for thick, old adhesive that needs time to soften before you can get it off the surface.

If you've used xylene, acetone, n-butyl acetate, or denatured alcohol to remove bulk glue, you've probably seen the adhesive loosen up, roll into balls, and stick right back to the vehicle as the solvent dries. Then you add more remover and go over the same area again.

This formula stays wet longer. That gives it more time to penetrate and swell the adhesive and gives you more time to collect the residue before it dries.

Use it after the film comes off to clean up the adhesive left on the surface. That could be vinyl wrap glue, PPF adhesive, or residue from reflective graphics and window tint.

We use a blend of polar and nonpolar solvents because the adhesives left behind by different films don't all respond the same way. The formula also has a nonionic surfactant that improves wetting and helps with release and cleanup as you remove the softened glue.

We first developed this version to meet California's VOC requirements. During testing and use, we found other reasons to offer it:

  • Longer working time
  • Noticeably lower odor, based on customer feedback
  • A lab-tested flash point of 161°F, much higher than traditional solvents like xylene or acetone

It's still a combustible solvent remover, so keep it away from ignition sources.

Our original Adhesive-Off Pro is still available. It works, it costs less, and it's still a good choice if you're happy with it.

Apply enough to wet the adhesive, let it soften, and collect the residue while it's still wet. Thick buildup may need another application. Always spot-test first and follow the label directions.

  • In stock, ready to ship
  • Backordered, shipping soon

Free shipping on orders over $250

Questions? Call us: 678-634-6557

Remove Adhesive Fast — Gentle on Surfaces, Tough on Glue

California-compliant formula for regulated markets.

Commercial-Grade Control for Wraps, Graphics, and Decals

Adhesive-Off Pro is engineered for wrap installers, sign shops, and fleet professionals who need power — without the eye-burning fumes or surface damage caused by harsh chemical strippers like Xylene. This California-compliant formula delivers effective removal of pressure-sensitive adhesives with controlled dwell and clean wipe-off. Works on adhesive residue from vehicle wraps, decals, PPF, and more.

Smart Performance, Surface Conscious

Adhesive-Off Pro delivers controlled adhesive removal on vehicle panels, glass, and clear-coated surfaces. While it's more surface-conscious than aggressive industrial strippers, it's still a strong solvent — avoid use on delicate plastics like polycarbonate, acrylic, or brittle trim unless you've spot tested first.

Adhesive Removal

  1. 1 Apply directly to adhesive
  2. 2 Allow to dwell for 60 seconds — allow longer dwell time and an additional coat for rubberized and thick adhesives
  3. 3 Wipe, scrape, or towel off residue — pressure washers can also be used
  4. 4 Repeat if needed for heavy buildup
Safe for These Surfaces
Paint (clear coat)
Glass
OEM metal surfaces
Surfaces Requiring Testing
Polycarbonate
Acrylic
Brittle plastic trim
Aftermarket plastics
Lenses

Always test on a small area before full application. Keep away from all acrylics, plastics, and headlights.

  • Free shipping on all orders over $250
  • Orders before 2:00 PM EST ship the same day
  • Standard delivery: 3–5 business days
  • Tracking emailed on every order
This is the California-compliant version of Adhesive-Off Pro. It is built on a California-compliant formula for regulated markets and removes pressure-sensitive adhesive the same way — apply, let it dwell, wipe off.
Yes. This is the version made for regulated markets, including California. The standard Adhesive-Off Pro cannot be shipped there.
Sixty seconds. For rubberized and thick adhesives, allow a longer dwell time and apply an additional coat. Then wipe, scrape, or towel off the residue — a pressure washer can also be used. Repeat if needed for heavy buildup.
Paint, glass, and OEM metal surfaces, including clear-coated vehicle panels. It is more surface-conscious than aggressive industrial strippers, but it is still a strong solvent — spot test first near lenses, trim, and aftermarket plastics, and avoid delicate plastics such as polycarbonate and acrylic. Do not use near open flame. For professional use only.
  • 5 stars: 5 (83%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 1 (17%)
M
Mitch Musicant

So far great Product. Works easily to remove old adhesive

E
ELITE FILM SOLUTIONS

This product is a must for any tint shop, makes stripping old cheap tint much easier with the cheap adhesive thats used. On back windows with defrost you will not have to worry about the lines, spray this and let it sit for about 30 seconds and it will come off with ease, no scraping at all. Great product.

L
Lincoln

Didn't seem to do anything for the adhesive.

Hi Lincoln! This would be extremely rare for us and very rare for the chemistry associated with AOP LOW-VOC. We would love for you to contact us regarding your experience... our experience would lead us to believe there is something else going on here. Sorry for your experience, get in touch with us! 678-634-6557 prostaff@brotherschemical.com (Zach)

Edit: Spoke to customer and identified he was looking at etching in the clear coat, which can be the case on many toyotas and hondas with factory installed ppf. This was not a product issue. Lincoln - if you can hear us - lets get an update!

S
Scott

This stuff is exactly what I was looking for! I had removed the lettering from almost 12 years in the FL sun but the adhesive stayed behind even though I used a heat gum and scraper. This is the only product that removed the rest of the adhesive. Now I just need to buff and wax from the fading of all those years.

M
Mason Russell

I paid a shop $1600 to remove a 7 year old wrap that was severely sun damaged/baked.
They returned the van with vinyl glue residue all over. I ordered the ca compliant adhesive off and it works like a charm. I was surprised to see how much adhesive was still on the paint. It seems to have been gentle on the clear coat as well.
Thanks guys. The kicker was using the plastic scraper I got from you guys.

C
Chris Hipkins

Our Customer was pleased with the adhesive off and we are ordering a larger stock order from it

Adhesive-Off Pro - Low-VOC - Fast, Low-Odor Adhesive Remover for Vinyl & PPF Residue (CA Compliant)
Adhesive-Off Pro - Low-VOC - Fast, Low-Odor Adhesive Remover for Vinyl & PPF Residue (CA Compliant) $36.99
30-Day Satisfaction Guarantee American Express Apple Pay Diners Club Discover Google Pay Mastercard